– 61 –
(4) Performing setting of the production control information
1
Display the production control screen.
Dsplay the producton control screen referrng to
-2-24.(3) observing the production control information
3
Input the pitch time.
Next, nput the ptch tme requred for one process. When
PITCH button
B
of the aforementoned tem
1
s
pressed, the ptch tme nput screen s dsplayed.
Input the value you desre wth ten keys or UP/DOWN buttons.
After the nput, press ENTER button
E
.
4
Input the number of times of thread trimming.
Next, nput the number of tmes of thread trmmng per proc-
ess.
When number of tmes of thread trmmng button
C
of
the aforementoned tem
1
s pressed, the number of tmes of
thread trmmng nput screen s dsplayed.
Input the value you desre wth ten keys or UP/DOWN buttons.
After the nput, press ENTER button
F
.
* When the input value is "0", count of the number of times
of thread trimming is not performed. use this function by
connecting the external switch.
2
Input the final target value.
Frst, nput the number of peces of the target of producton n
the process to whch sewng s performed from now on. When
final target value button
A
is pressed, the final target
value nput screen s dsplayed.
Input the value you desre wth ten keys or UP/DOWN buttons.
After the nput, press ENTER button
D
.
A
B
C
D
E
F
