− 62 −
No.
Item
Setting range
/
Edit unit
Initial value
Thread breakage detection
With/without thread breakage detection is selected.
- - -
With thread break
-
age detection
Without thread
breakage detection
Flap presser motion mode
Motion order of flap presser is selected.
- - -
From right
From left
Right/Left at the
same time
Side where flap is
put
*
When right and left are simultaneously actuated with customizing of
pedal setting, this parameter is neglected and the right and left are
simultaneously actuated.
Clamp foot down order change-over
Lowering order of clamp foot is selected.
- - -
From right
From left
Right/left at the
same time
*
When right and left are simultaneously actuated with customizing of
pedal setting, this parameter is neglected and the right and left are
simultaneously actuated.
Folding plate motion mode
“Return/No return” of folding plate when corner knife projects is se
-
lected.
- - -
Return
No return
Binder pressure reduction rise prohibition
Pressure reduction rise of the binder at the time of jump feed is prohib
-
ited.
- - -
Pressure reduc
-
tion rise is prohib
-
ited
Pressure reduc
-
tion rise
Standing pedal continuous depressing timer effective/ineffective
change-over
Effective/ineffective of
standing pedal continuous depressing
timer is selected.
*
It is possible to set only when
one-shot pedal is set.
- - -
Ineffective
Effective
. . . Item that is not displayed due to other setting state.