− 87 −
5
Clear the counted value
When clearng the counted value, set the count to the stop state
and press CLEAR button
F
.
*
CLEAR button is displayed only in case of stop state.
When CLEAR button
F
is pressed, the clear confirmation
screen s dsplayed.
When CLEAR button
G
is pressed in the clear confirmation
screen, the counted value s cleared.
3
Start the measurement
Press START button
C
, and the measurement of each data
s started.
4
Stop the count
Display the operation measurement screen referring to Items
1
and
2
of
Observing the operation measurement in
.
When the measurement is being performed, STOP button
D
is displayed. When STOP button
D
s pressed, the
measurement s stopped.
C
is displayed at the position of
STOP button. In case of continuing the measurement, press again
START button
C
. The measured value s not cleared untl
CLEAR button
E
s pressed.
G
F
D
E
C