− 89 −
(4) take-in of the data
1
Display the communication screen
When COMMUNICATION key
of switch seat section is
pressed in the input screen, the communication screen (screen A)
s dsplayed.
2
Select the communication procedure
There are four communication procedures as described below.
A
Writing data from media to panel
B
Writing data from personal computer (server) to panel
C
Writing data from panel to media
D
Writing data from panel to personal computer (server)
Select the button of communication procedure you desire.
3
Select the data No.
When
E
is pressed, the writing file selection screen is dis-
played.
Input the file No. of the data you desire to write. For the file No.,
input APW×××. of the file name and the numerals of the part ×××
of EPD. Designation of the pattern No. of writing destination can
be performed in the same way. When the writing destination is the
panel, pattern Nos. whch have not been regstered are dsplayed.
4
Determine the data No.
When ENTER button
F
s pressed, the data No. selecton
screen s closed and the screen returns to the communcaton
screen (screen A).
5
Start communication
When COMMUNICATION START button
G
s pressed, the
data communcaton starts.
The durng communcaton s dsplayed durng communcaton
and the screen returns to the communication screen after the end
of communication.
Do not open the cover during reading the data. Data may not
be read in.
B
F
D
A
C
E
Communication screen
(screen A)
G
