– 109 –
<Sewing screen (Maintenance personnel mode)>
8-4. Custom pitch
It is possible to register as many as 20 different sewing de-
signs each of which consists of several different pitches (10
steps at the maximum).
As many as 100 stitches of the same pitch can be set in one
step.
* This operation is to be carried out under the mainte
-
nance personnel mode.
8-4-1. Selecting a custom pitch
Select an already-created custom pitch.
Custom pitch can be used fro pattern sewing, reverse-feed stitching at the beginning of sewing and re-
verse-feed stitching at the end of sewing. In this section, application of a custom pitch to a sewing pattern is
described as an example.
①
Displaying the pitch input screen
1. Press
❶
on the sewing screen un-
der the maintenance personnel mode.
The "sewing data edit screen" is displayed.
<Fig. 1>
Step1
1mm 3 stitches
Step2
2mm 2 stitches
Step3
3mm 1 stitches
Step4
1.5mm 2 stitches
Next step
Custom
pitch No.1
Next custom
pitch
❶
1. Desired stitches may not be formed depending
on the sewing speed. If desired stitches are
not produced, the sewing speed should be
reduced.
2. In the case the pitch is 0.00 mm, it is not
possible for the needle to enter the same
needle entry point.
