JUKI DLN-415, Instruction Book

INSERTING THE NEEDLE

INSTALLING AND REMOVING

r

 X   needler.

There are many

numbers and 

 of the needle, 

the 

 size and number depending 

 the

thickness of the thread 

 of sewing

material.

1. Rotate the hand wheel and bring the needle

bar to the highest 

2. Loosen the needle clam,, screw.

3. Hold the needle 

 that the long groove 

the needle comes to 

 side.

4. 

 the needle deep into the needle hole

5. Then securely tighten the needle clamping

THE SEWING HOOK

 10 

During the running of the machine, if thread

 get into 

 hook or the position 

 the

hook changes for 

 exchange

the hook with a new one, do 

 follows in

order:

 the hand wheel and bring the needle

bar to the highest position.

 Remove the bobbin 

 and the needle

3. Remove the bobbin 

 base positioning

 ret screw and take 

 the bobbin

 positioning finger.

 the 3 

 of the sewing hook.

5. Rotate the hand wheel and raise up the

feed base   

 highest position.

6. Rotate the sewing hook with your hand

and 

 it in the 

 in

the figure.

7. Pull the hook to your left and take it 

 To install the hook back, 

 this pro-

cedure.