background image

v

FOR SAFE OPERATION

  1.  For the safety, never operate the sewing machine with the ground wire for the 

power supply removed.

  2.  Be sure to turn OFF the power switch in prior when connecting/disconnecting the 

power plug.

  3.  When thunders occurs, stop the work for the safety and disconnect the power plug.
  4.  When the sewing machine is suddenly moved from a cold place to a warm place, 

there is a case where dew condensation may occur. Turn ON the power after there 
is no worry of the drop of water.

 5. To 

prevent 

fi

 res, periodically draw out the power plug from the plug socket and 

clean the root of the pins and the space between pins.

  6.  The hook rotates at a high speed while the machine is in operation.

To prevent possible injury to hands, be sure to keep your hands away from the 
vicinity of the hook during operation. In addition, be sure to turn OFF the power to 
the machine when replacing the bobbin.

  7.  To avoid possible accidents due to abrupt start of the machine, be sure to turn OFF 

the power to the machine.

  8.  Be careful of handling this product so as not to pour water or oil, shock by dropping, 

and the like since this product is a precision instrument. 

   9.   When tilting or returning the sewing machine to the home position, hold the upper 

side of the machine head with both hands and perform the work quietly so that 

fi

 ngers or the like are not caught in the machine.

  1.  To avoid personal injury, never put your 

fi

 ngers under the needle when you turn ON 

the power  switch or operate the sewing machine.

  2.  To avoid personal injury, never put your 

fi

 ngers into the thread take-up cover while 

the sewing machine is in operation.

  3.  Turn OFF the power switch when tilting the machine head, or removing the belt 

cover or the V belts.

  4.  To prevent possible personal injury caused by being caught in the machine, keep 

your 

fi

 ngers, head and clothes away from the handwheel and the thread take-up 

while the sewing machine is in operation. In addition, place nothing around it.

  5.  To avoid personal injury, never operate the sewing machine with the 

fi

 nger guard 

removed.

  6.  To avoid personal injury, be careful not to allow your 

fi

 ngers in the machine when 

tilting the machine head.

CAUTION :

Note that safety devices such as “eye guard”, “

fi

 nger guard”, etc. may be omitted from the 

illustrations in this Instruction Manual for easy explanation.
When operating the machine, be sure not to remove these safety devices.

–  10 – 

1 8

WARNING :

To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work 
after turning the power off and ascertaining that the motor is at rest.

Summary of Contents for DSC-244

























Reviews: