13
1
2
3
4
5
②
1
3
4
5
2
②
①
③
CAUTION:
Turn OFF the power switch before threading the
machine.
1
Turn the power switch off.
Draw the end of the thread around the upper thread
guide.
Threading the Machine
2
While holding the thread near the spool
②
, draw
the end of the thread down around the check spring
holder
③
.
②
Spool
③
Check spring holder
3
Firmly draw the thread up from right to left over the
take-up lever, and down into the take-up lever eye.
4
Pass the thread through the lower thread guide. Slide
the thread behind the needle bar thread guide on the
left.
5
Use the needle threader to thread the needle (see
page 14).
Raise the presser foot. Press the
needle up/down button
①
to raise
the thread take-up lever to its
highest position.
①
Needle up/down button