– 23 –
Type
Part No. of presser foot
Type 1
B151177 1 000 *
Type 2
B151177 2 000 *
Type 3
B151177 3 000 *
Type 5 *
—
(1) Setting procedure of the presser type
1) Call the presser type setting parameter.
When MODE key
❹
is pressed, the
memory switch (level 1) edit screen
A
is dis-
played.
2) Select the presser type.
Press DATA CHANGE key
❼
, and the
picture is changed as shown in the illustration
below. Set the presser type
B
actually mounted
on the sewing machine referring to
(2) Table of
presser type
below.
4. Input of the presser type
* Set type 5 when using the presser other than
type 1 to 3. Change
Presser size
width and
Presser size length of the
memory switch (level 1) to adjust to the press-
er to be used.
→
.
* When using type 5 with stitch width of 6 mm
or more and 41 mm or more in length, it is
necessary to replace components such as
presser arm, feed plate, etc.
(2) Table of presser type
Set the number in the frame of engraved part number of presser to the type of presser.
Type 1 Type 2 Type 3 Type 5 *
❼
❹
A
B
