Separately driven needle bars which provide
outstanding durability and holding power
(LH-4168-7, LH-4188-7)
Right-needle stop switch
Left-needle stop switch
Separately driven
needle bars
(Organized split
needle bar)
JUKI's unique
separately driven
needle bars are
housed inside.
Teaching function
The number of
stitches in
a sewing area with
one of the needle
bars held idle, is
automatically stored.
Optional panel: IP-110B
The machine is installed with JUKI's newly developed
unique separately driven needle bars. When one of
the needle bars is stopped, it is held in place with
added stability. This mechanism demonstrates
outstanding durability. The machine is able to run at
the highest sti/min even when only one needle is in
operation (the other needle bar is held idle). This
feature totally eliminates a fundamental problem of
2-needle bar lockstitch machines, which is how to hold
either needle bar securely in an idle state.
■
Corner-teaching function (provided as standard)
To start corner sewing, the operator need only press
the right or left stop switch. Then, the machine
automatically counts the number of stitches. This allows
the operator to concentrate on material handling.
Upon completion of corner sewing, the one-needle stop
state is automatically reset.
■
Automatic feature (Optional panel : IP-110B and
Auto lifter : AK125 are required)
To sew two or more corners continuously, it is possible to
enter a sewing program on the IP panel to automatize a
sewing sequence from the beginning of sewing to thread
trimming (including sewing of two or more corners).
As many as 20 steps of constant-dimension sewing and as
many as 8 different corner patterns can be stored in one
program. In addition, various conditions such as the
up/down position of the needle bars, up/down position
of the lifter, forward/reverse feed and automatic thread
trimming can be set on a step-by-step basis.
For sewing pockets on men's shirts, hip pockets on jeans and topstitching on collars, a corner sewing process is required without
exception. The machine is provided with a function for automatically or semi-automatically sewing the corner sewing process with
ease.
The function for separately driving the needle bars is automatically reset (LH-4168-7, LH-4188-7)
●
Teaching function
1. Press the left-needle stop switch at point A to stop the left needle.
2. Perform sewing with the left needle bar held idle until point B is reached.
(The number of stitches is automatically stored in the memory)
3. At point C, the left needle, which has been held in an idle state, is
automatically released.
No resetting
operation is
required.
A B
C
