−
62
−
(4) Mechanical origin retrieval
Function No. : 007
Function : This function sets the operation of the mechanical origin retrieval.
Item : 1 Setting the operation of each sewing cycle
(Set level 2)
OFF
[Contents] Not operative : Initial setting
ON
[Contents] Origin retrieval is made for each sewing cycle.
Item : 2 Operation setting at the time of the moving limit error
(Set level 2)
ON
[Contents] Origin retrieval is made when returning from the moving limit. (Initial setting)
OFF
[Contents] No operation
(5) Return to origin operation
Function No. : 008
Function : This function sets the returning route to the sewing start when
pressing the return to origin switch.
Item : 1 Operation mode setting
(Set level 1)
ROUTE
[Contents] The machine returns to the sewing start point through the shortest
distance. : Initial setting
HOME &
[Contents] The machine moves to the sewing start point along the pattern
data after the origin is retrieved.
TRACE
[Contents] The machine moves to the sewing start along the pattern data in
the reverse direction. : Inversion specification • Initial setting
Item : 2Setting of the return to the upper dead point only at the time of origin retrieval and return to origin
(Needle UP in the reverse rotation)
(Set level 1)
OFF
[Contents] Without stopping at the upper dead point : Initial setting
ON
[Contents] With stopping at the upper dead point : Inversion specification initial
Indication
Indication
Indication
Indication
(6) Counter indication setting
Function NO. : 009
Function : Counter indication setting
Item : 1 Bobbin thread counter indication setting
(Set level 1)
UP
[Contents] UP counter setting (When one cycle stitching completes, the value
shown on the bobbin thread counter increases by 1 count. The
counter counts the bobbin thread from 000 to 999.)
If the counter set value other than “000” is set, when the set value
has come equal to the counter set value, the sewing machine stops.
: Initial setting
DOWN
[Contents] DOWN counter setting (When one cycle stitching completes, the
value shown on the bobbin thread counter decreases by 1 count.
The counter counts the bobbin thread from 999 to 000.)
If the counter set value other than “000” is set, the counter starts
counting down from the set value and if the counter value has
become “0000”, the sewing machine stops.
Item : 2 Production counter indication setting
(Set level 1)
OFF
[Contents] Does not indicate the production counter.
ON
[Contents] Indicates the production counter. : Initial setting
Item : 3 Number of counter digits setting
(Set level 2)
3 FIG
[Contents] This function makes the number of indicating digits 3 digits. : Initial setting
4 FIG
[Contents] This function makes the number of indicating digits 4 digits.
Indication
Indication
Indication
