background image

STYLE OF MACHINES

36200UAD52

FLATSEAMER:  For simultaneously trimming right and left plies and flatseaming knit undergarments, infants
clothing and similar light to medium weight materials where closing elastic is required.
Seam specifications 607-FSa-1. Components produce a .205" (5.2mm) wide seam.

36200UED52

LAP FLATSEAMER:  For simultaneously trimming right and left plies and lap seaming men's and woman's briefs,
undergarments, sweatpants, sweatshirts, infant sleepers and similar garments. Flat sewing parts with lap seam
presser foot and lapformer. Seam specifications 607LSa-1. Components produce a .205"(5.2mm) wide seam.

36200UED60

LAP FLATSEAMER: Same as 36200UE52 except fitted with components to produce a .236" (6.0mm) wide seam.

36200UHD60

LAP FLATSEAMER:  For simultaneously trimming right and left plies and lap seaming men's briefs shorts, and similar
garments made of light to medium weight material where crossing elastic and heavy seams, such as leg
bindings is necessary. The right section of the sewing parts are raised .050" (1.27mm) to assure a better lap seam.
Seam specifications 607-LSa-1. Components produce a .205" (5.2mm) wide seam.

36200UJD60

FLATSEAMER: Same as 36200UA52 except fitted with components to produce a .236" (6.0mm) wide seam.

36200UJED60

FLATSEAMER:  For simultaneously trimming right and left plies and flatseaming knit undergarments, infants
clothing and similar light to medium weight materials where closing elastic is required.
Seam specifications 607-FSa-1.
LAP FLATSEAMER:  For simultaneously trimming right and left plies and lap seaming men's briefs shorts, and similar
garments made of light to medium weight material where crossing elastic and heavy seams, such as leg
bindings is necessary.  Seam specifications 607-LSa-1. (Machine includes sewing parts to sew both FSa-1 Flat
(butt) seam and LSa-1 Lap seam.)
Components produce a .236" (6.0mm) wide seam.

36200ULD60

LAP FLATSEAMER:

36200UMD60

LAP FLATSEAMER: Same as 36200UHD52 except fitted with components to produce a .236" (6mm) wide seam.

36200UYD52

LAP FLATSEAMER:  For simultaneously trimming right and left plies and lap seaming operations on the leg openings
of knitted boxer style briefs using wide knitted callerette material. Flat sewing parts with special lap seam presser
foot and special lap former. Fitted with long feed dogs," T" shaped yielding section with light weight spring, light
presser bar spring and wear plates on presser foot.
Seam specifications 607LSa-1. Components produce a .205(5.2mm) wide seam.

4

Summary of Contents for UnionSpecial 36200UAD52

































































Reviews: