19
ENGLI SH
SAFETY INSTRUCTIONS
Read these Operating Instructions carefully before use!
•
Never leave the machine unattended when children are present.
•
Check that the mains voltage corresponds with the rated voltage for the tool.
•
Never use the tool if it shows signs of damage.
•
Do not tie knots in the power cord.
•
Always check that the power cord is in perfect condition. Risk of potentially fatal electric shock.
•
Never use the machine if it has been dropped on the floor or is damaged or if the power cord
and/or plug are damaged.
•
The machine is intended for temporary use only.
•
Always wear gloves and eye protection.
•
Never expose the machine to rain or moisture. Store in a dry place.
•
Never leave the machine unattended.
•
Keep children away from the machine.
•
Do not use in the vicinity of flammable or explosive substances or gases.
•
Only use original accessories and spare parts from the manufacturer.
•
Do not wear loose-fitting clothing or jewellery. Wear non-slip shoes and use a hair net if you have
long hair. Make sure you have a firm footing when working.
•
Never use the machine in a wet environment or in areas with a high humidity level (bathrooms,
saunas, etc.). Do not immerse any part of the machine in water. Risk of electric shock.
•
The power cord must only be replaced by the supplier.
•
Repair work must be carried out by the supplier.
•
Secure the workpiece before working on it.
•
Never work on pieces that are too small to be secured.
•
Wear a breathing mask and ear protection when using the machine.
•
Check that the workplace is always clean.
•
Wear eye protection when working.
•
Never use the machine if you are tired or under the influence of drugs, alcohol or medication.
•
Always make sure the tool is switched off before connecting it to the mains.
•
The machine must never be modified or converted.
•
Always maintain a firm grip when operating the machine to ensure proper control.
Symbols
Always wear eye and ear protection.
General warning. Danger of death.
Read the Operating Instructions carefully before use
Always wear protective gloves when working with metal parts.
Summary of Contents for 010-131
Page 24: ......
