ENGLISH
12
INSTALLATION
1.
Choose a free space to install the strip light.
2.
Unpack the strip light and its accessories.
3.
Screw up one of the brackets (fig. A-2).
4.
Slide the light fitting onto the unscrewed bracket (fig. A-3).
5.
Measure out where the other bracket should be placed, and screw on the bracket (fig. A-4). Slide
the light fitting onto both brackets (fig. A-5).
6.
The strip light can also be fitted at a 90 degree angle to the surface. Use the angle brackets and fit
in the same way as for the normal brackets (fig. B).
HANDLING
Changing the fluorescent tube
1.
Disconnect the mains power supply.
2.
Remove the protective cover in front of the fluorescent tube.
3.
Turn the fluorescent tube until it releases.
4.
Replace the fluorescent tube with an equivalent tube.
5.
Refit the protective cover.
MAINTENANCE
Where necessary, clean the light fitting with a soft, lint-free cloth.
