EN
26
USE
LOWERING
1.
Hold the cord at eye level, move it to the right and carefully pull until the catch releases. Allow
the cord to slide between your fingers until the blind has lowered to the required position.
2.
Move the cord to the right to automatically lock the blind (diagram 11).
LIFTING
1.
Pull the cord until the blind lifts up to the required position.
2.
Release the cord to automatically lock the blind (diagram 12).
ADJUST THE LAMINAE
1.
Turn the rod to adjust the laminae on the blind.
MAINTENANCE
• Clean the laminae with a vacuum cleaner or cloth.
• To take down the blind, carefully open the bracket tabs with the help of a screwdriver. Wrap a
piece of cloth round the screwdriver to avoid any damage.
REFIT THE LINE COLLECTOR
If the line collector has loosened the parts must be put together again before using it again. Make
sure the lines are positioned as shown in diagram 13.
Summary of Contents for Hard Head
Page 3: ...1 2 3 4 5 6 ...
