5
Safet y re commen da tions for the op erat or
¾
You received a product conceived for industrial use. Nevertheless, avoid strikes to the housing,
vibrations, damages to the keypad foil (keys, display) or contamination.
¾
Make sure the product is regularly checked for proper condition. Regularly check (at least every
2 years) the proper condition of the mandatory, warning, prohibition and safety labels.
¾
Take care that the mains supply features a low impedance to avoid any negative affects on the
instrument being operated in the same mains.
¾
This unit is designed for operation in a controlled electromagnetic environment. This means that
transmitting devices (e.g. cellular phones) should not be used in the immediate vicinity. Magnetic
radiation may influence other units with components susceptible to magnetic fields (e.g. a
monitor). We recommend to keep a minimum distance of 1 m.
¾
Permissible ambient temperature: max. 40 °C, min. 5 °C.
¾
Permissible relative air humidity: 50 % (40 °C).
¾
Do not store in an aggressive atmosphere. Protect from contaminations.
¾
Do not expose to sunlight.
Ap pr opriate Oper ation
Only qualified personnel is authorized to perform configuration, installation, maintenance and repairs
of the water bath. Routine operation can also be carried out by untrained personnel who should
however be instructed by trained personnel.
Use
For the use according to the intended purpose, special material requirements have to be respected
(bath fluids). Only use non-acid and non corroding materials.
Observe all warnings for the used materials (bath fluids) and the respective instructions (safety data
sheets).
Only use the unit in well ventilated areas. (see page 16).
The recirculating coolers are not for use in explosive atmosphere
When using hazardous materials or materials that could become hazardous,
the operator must
affix
the enclosed safety labels to the front of the unit so they are highly visible:
1
Danger area. Attention! Observe instructions.
(operating manual, safety data sheet)
2
or
Carefully read the user information prior to beginning operation.
Scope: EU
2
Carefully read the user information prior to beginning operation.
Scope: USA, NAFTA
Observe the instructions in the manuals for instruments of a different make that you connect to the
circulator, particularly the corresponding safety instructions. Also observe the pin assignment of plugs
and technical specifications of the products.
www.
.com
information@itm.com
1.800.561.8187
