JUMAR REG-03TFT
MENU WUW
In this menu, the user sets the temperature of the warm water usage. Given below are
the parameters you can change.
Parameter's description:
No
Parameter
name
Description
1
WUW
PRIORITY
If the priority is set on “
CH
” the boiler heats the heating water
and simultaneously the useful warm water. If the pre-set
temperature of the useful warm water is larger than the
previously set temperature of the heating water, the regulator
heats the WUW buffer only up to the pre-set temperature of
the heating water. However, setting the priority on “
WUW
”
heats the WUW buffer first to the temperature which was set
for the WUW buffer and the excess of the WUW pump (if the
furnace's temperature is lower than the pre-set temperature of
the WUW buffer), then lowers the temperature of the boiler up
to the chosen value and heats the heating water.
2
WUW
HYSTERESIS
The value of the warm usage water temperature has to decline
to start the heating again.
- 25 -
Summary of Contents for REG-03TFT
Page 2: ...JUMAR REG 03TFT 2...
Page 35: ...JUMAR REG 03TFT NOTES 35...
