9
5. When the device has successfully paired with the radio, “bt” will stop flashing.
NOTE:
When a device is paired to the radio, information for connecting to the
device is saved in the radio’smemory.
6. When streaming audio from a BLUETOOTH® enabled device, press the
SCAN left and right arrow buttons to go to the previous or next track. Briefly
press and release the PRESET button to cycle between pausing andplaying
theaudio.
NOTE:
These controls may not be supported by the BLUETOOTH® device
and/or application you are using.
7. All BLUETOOTH® enabled device controls can be used normally while paired
to the radio.
NOTE:
Volume for any device paired to the radio can be adjusted using the
volume control for that device or by using the radio’s VOL + or VOL – button.
8. To disconnect the BLUETOOTH® enabled device, press and hold the PRESET
button. When the device is disconnected, “bt” will begin flashing in the LCD
display and the radio will begin searching for anotherdevice.
USING THE USB DEDICATED CHARGING PORT
The USB dedicated charging port provides charging power of 5 Volts DC at up to
2.1 Amp for your cell phone, MP3 player, or other USB devices.
NOTICE:
Attempting to charge devices rated more than 1 Amp, such as a tablet, could
damage the USB dedicated charging port and/or the device.
1. Connect one end of a USB cable (not provided) to your USBdevice.
2. Connect the other end of the USB cable (not provided) to the USB dedicated
charging port to begin charging thedevice.
NOTE:
The USB dedicated charging port provides power only; it does not provide
any data communication capabilities.
1. Disconnect the radio from the AC outlet before cleaning. Dirt and grease may
beremovedfromtheexterioroftheradiousingacloth.Donotusewaterorany
cleaningsolutions.
2. Neverusesolventsorotherharshchemicalsforcleaningthenon-metallicparts of the
radio. These chemicals may weaken the materials used in these parts. Use a
cloth dampened only with water and mild soap. Never let any liquid get inside
the tool; never immerse any part of the tool into aliquid.
3. NEVERsprayorinanyotherwayapplylubricantsorcleaningsolventsinsidethe tool.
This can seriously affect the life and performance of thetool.
4. Useonlymildsoapanddampclothtocleanthetool.Neverletanyliquidget inside
the tool; never immerse any part of the tool into aliquid.
PROBLEM
CAUSE
SOLUTION
The radio does not work
The 18/20V battery pack is
depleted
Charge the battery pack
The radio lost clock memory and
preset channels after the 18/20V
battery pack is removed.
The AAA size batteries are
depleted
Replace the AAA batteries
OPERATION
MAINTENANCE
TROUBLESHOOTING
