41
5 Operation
5.4.1
Curve diagram
In the curve diagram, the analog and digital signals configured for the relevant group are dis-
played as analog curves or digital traces. Digital traces and channel information can be hidden
in the group configuration.
The diagram type (horizontal, vertical) is selected individually for each group in the configura-
tion. The following view shows the vertical diagram. Accordingly, the description also applies to
the horizontal diagram (see the example later on).
Group view
Navigation bar
(1)
Description (point) of the analog curve
(4)
Description (point) of the digital trace
(2)
Analog curve (color change with alarm)
(5)
Digital trace
(3)
Channel information: description
(pointer), short signal description (con-
figurable), and current value of analog
signal (color change with alarm)
(6)
Event off
(7)
Alarm off
(8)
Event on
(9)
Alarm on
(10)
Navigation bar
(2)
(3)
(1)
(4)
(5)
(10)
(8)
(6)
(7)
(9)
(1)
Hide/show digital traces
(4)
Call up memory display (history)
(2)
Hide/show channel information
(5)
Go to next active group
(3)
Hide/show analog values
(1)
(2)
(3)
(4)
(5)
