8 / 13
JUNG ANTRIEBSTECHNIK U. AUTOMATION GMBH
♦
Felsweg 18
♦
35435 Wettenberg
♦
Germany
Tel.: +49-(0)641-48017-0
♦
Fax: +49-(0)641-48017-15
♦
eMail: ja2@ja2-gmbh.de
♦
www.ja2-gmbh.de
3.2
Warnings for Intended Use
Fast moving Machine Parts
Our linear motor systems are high-dynamic machine elements. Necessary
precautions must be taken to prevent contact with moving parts during
operations. This can be done by installing covers, enclosures, light curtains,
safety mats, etc..
Operations, without appropriate safety measures are forbidden. Operations
may only be carried out by qualified personnel. During assembly the
machine is to be turned off!
Burn Hazards
The sliders of linear motors can reach temperatures of 80 °C during
operations, which may cause burns upon contact.
Bruises & Sprains
Our linear motor systems can apply very high accelerations, high top speeds
and forces over 1.000 N. Depending on the application and the duration of
exposure apropriate protective devices must be used!
Severing of Limbs
Our linear motor systems can apply very high accelerations, high top speeds
and forces over 1.000 N. Depending on the application and the duration of
exposure apropriate protective devices must be used!
Risk Assessment & Performance Level (PL) of Protective Measures
Since the risk depends on the type of machine, the assembly conditions and
the implemented protective measures, a general specification to minimize
risks during assembly cannot be given by us. We recommend the software
assistant SISTEMA for risk assessment and evaluation of the PL according
to DIN EN ISO 13849.
