Adjusting the brightness (only dimming insert)
￭
Long press on the operating cover at the top or bottom.
Saving the switch-on brightness (only dimming insert)
￭
Adjust the brightness.
￭
Press operating cover over entire surface for longer than 4 seconds.
Example 2: A motion or presence detector is fitted on a switch insert on the main
device
Switching the light
￭
Press the operating cover at the top.
Light is switched on.
￭
Press the operating cover at the bottom.
Presence detector: Light is switched off.
Motion detector: Run-on time will be restarted.
4
Information for electrically skilled persons
Connecting and mounting the devices
Image 1: Connection diagram 3-wire extensions on a main device
Satellite insert 3-wire, power supply
4 / 6
82599423
25.08.2022
J0082599423
