Electronic potentiometer
Light Management
Electronic potentiometer, switch function
Art.-No.: 240-10
Electronic potentiometer, push-button function
Art.-No.: 240-31
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Electronic potentiometer
(2) Frame
(3) Central plate
(4) Control button
(5) Fuse holder
(6) Screw terminals
(7) Adjuster
3 Function
Intended use
-
Switching and brightness adjustment for lamps with operating devices with 1-10 V interface
-
Installation in appliance box to DIN 49073
1/5
32540753
J:0082540753
29.06.2012
