eNet radio switch/push-button actuator in SCHUKO housing
Parameters
Setting options, Basic setting
Explanations
yet active, as a light controller
has not yet been implemen-
ted.
Invert switching output
On, Off
Basic setting: Off
Inverts the switching output
from NO contact function
(factory setting) to NC contact
function
Minimum switching repeat
time
100 ms ... 10 s
Basic setting: 100 ms
Limits the switching speed of
the device by increasing the
value, in order to protect the
load, for example. Only when
the set time has elapsed is
switching possible again. The
last command during the
blocking time is executed after
a delay. The switching repeat
time starts after each switch-
ing operation.
Information window
During channel selection in the Information window, the following settings can be made or val-
ues displayed.
Display value
Explanations
Load state
The load can be switched on or off.
Restraint
Display of forced position status.
Operating hours
Display of the operating hours since the last
restart in the Settings window Einstellungen.
8
Conformity
Hereby Albrecht Jung GmbH & Co. KG declares that the radio system type
Art. no. FMAS10ZS
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce
9
Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
kundencenter@jung.de
www.jung.de
10 / 10
82592223
15.12.2020
J0082592223
