eNet radio switch/push-button actuator in SCHUKO housing
Product characteristics
–
Status feedback to radio transmitter
–
Scene operation possible
–
Switchable output with Prog button
–
Status indicator via LED
The repeater function can be activated via the eNet radio diagnostics device and the eNet
Server.
Can be set with eNet server:
–
Push-button function
–
Flash function
–
Repeater function
–
Run-on time
–
Switch-on delay / switch-off delay
–
Operation as NO or NC contacts
–
Switch-off warning
–
Minimum switching repeat time
–
Operation locks
–
Continuous on, Continuous off
Supplementary functions with eNet Server:
–
Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
–
Update of the device software
–
Reading of error memory
Behaviour after mains voltage return
The response after mains voltage return can be configured with the eNet server. Default setting:
Off.
4
Operation
When operating with the eNet Server, operation and signalling could vary from what is de-
scribed here.
Operation with radio transmitters
Operation is with radio transmitters, please observe the radio transmitter instructions.
Operation with Prog button
￭
Press Prog button briefly.
The load switches on or off.
Status LED lights up: output is switched on.
Status LED off: output is switched off.
5
Information for electrically skilled persons
5.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Always disconnect the device from the socket outlet before carrying out work on the
load!
2 / 10
82592223
15.12.2020
J0082592223
