eNet radio switch/push-button actuator in SCHUKO housing
￭
Release Prog button and press briefly once again within 10 seconds.
The status LED flashes more slowly for approx. 5 seconds.
The device is reset to default setting.
6
Technical data
Rated voltage
AC 230 V~
Mains frequency
50 / 60 Hz
Ambient temperature
-5 ... +35 °C
Degree of protection
IP20
Switching current at 35 °C
Ohmic
16 A (AC1)
Fluorescent lamps
4 AX
Minimum switching current AC
100 mA
Contact type
μ
Standby power
0.5 W
Connected load at 35 °C
Incandescent lamps
2300 W
HV halogen lamps
2000 W
Electronic transformers
1500 W
Inductive transformers
1000 VA
HV-LED lamps
typ. 500 W
Compact fl lamp.
typ. 500 W
Fluorescent lamps, uncompensated
920 VA
Capacitive load
690 VA (560 μF)
Dimensions W×H×D
57×142×78 mm
Radio frequency
868.0 ... 868.6 MHz
Transmission capacity
max. 20 mW
Transmitting range in free field
typ. 100 m
Receiver category
2
7
Parameter list
The device parameters can be changed with the eNet server:
Device and channels
Parameters
Setting options, Basic setting
Explanations
Function
Light, switching, unused
Basic setting: Light
Light
The channel is integrated for
the "Lighting" central function
in the eNet SMART HOME
app.
Switching
The channel is not integrated
in any central function.
Unused
The channel is not displayed
4 / 10
82592223
15.12.2020
J0082592223
