86
Releasbutton immediately when LED
turns off.
After releasing the radio button (Illus.
6 point a), the radio LED goes into a
short yellow interval. This smoke alarm
device with radio link will now activate
the connection mode in all remaining
smoke alarm devices with radio links of
the radio group.
After 5-15 seconds, the result of the
activation of the connection mode for
all smoke alarm devices with radio
links of the existing radio group will be
displayed:
successful activation of the connection
mode in all smoke alarm devices with
radio links of the radio group is display-
ed through a green signal of the radio
LED after which all the alarm units of
this radio group go into a regular, long,
yellow interval of the radio LED and
will now again be in connection mode
for about 10 minutes.
In order to add more smoke alarm
devices with radio links in delivery con-
dition to this radio group, please follow
the steps in section „Commissioning of
more smoke alarm devices with radio
links, connection mode and other set-
ting up of a radio group“
Removing assignment to a radio group
and resetting smoke alarm devices with
radio links in delivery condition
If a smoke alarm device with radio link
is assigned, for instance, to another ra-
dio group, the saved information must
first be deleted and the device must be
reset in delivery condition.
1. Deactivate the smoke alarm device
with radio link completely by pulling
en
Summary of Contents for FRWM 100 WW
