Art.-No.: 4071.0x LED, 4072.0x LED
Art.-No.: 8471.0x LED W, 8472.0x LED W
Time between short-
time and long-time
command
300 ms
400 ms
500 ms
700 ms
1s
This parameter defines the time
between a short-time and a long-time
telegram.
With function "Value transmitter 1 byte"...
Function
Value transmitter 0...255
Value transmitter 0…100 %
A button configured as "Value
transmitter 1 byte" permits selecting
whether the values to be transmitted are
interpreted as integers from 0 to 255 or
as a percentage from 0 % to 100 %.
Value on pressing the
button
(0...255)
0...
255
This parameter defines the value to be
transmitted to the bus when the button is
pressed. Visible only if "Function =
0...255"!
Value on pressing the
button
(0...100 %)
0...
100
This parameter defines the value to be
transmitted to the bus when the button is
pressed. Visible only if "Function =
0...100 %"!
With "Scene extension" function:
Function
Scene extension without
storage function
Scene extension with
storage function
In the setting "Scene extension without
storage function", a button-press
triggers the simple recall of a scene. The
device then transmits the configured
scene number immediately on pressing
the button. A long button-press has no
additional effect.
In the setting "Scene extension with
storage function", the device monitors
the length of the actuation. A button-
press of less than a second results in a
simple recall of the scene. After a
button-press of more than five seconds,
the device generates a storage
instruction and transmits a storage
telegram to the bus according to KNX
data type 18.001.
Scene number on
pressing the button
(1...64)
1
...64
In accordance with the KNX standard,
objects with data type 18.001 "Scene
Control" can recall or store up to 64
scenes by their numbers. The
parameter defines the scene number to
be transmitted when the button is
pressed.
Page 30 of 34
Software "10Fx11"
Parameters
