Jung KNX 4071.0 LED Series, Product Documentation

Art.-No.:  4071.0x LED, 4072.0x LED 
Art.-No.:  8471.0x LED W, 8472.0x LED W 

4.2 Software "10Fx11" 

4.2.1 Scope of functions 

General: 

- 

4 application programs adjusted to the device variants. Only one application program is 
required per device variant. 

- 

In the "neutral position" device variant, the operation concept of a control surface can be 
set to "rocker switch" (the same KNX function on both control elements) or to "button" (the 
same or different KNX functions on the control elements). In the "switch position" variant, 
push-button functions are exclusively configurable because each rocker cover only has one 
actuation pressure point. 

- 

In the ETS, the KNX functions "Switching", "Dimming" and "Venetian blind" are 
configurable for rocker switch operation concepts. In the pushbutton control concepts, the 
KNX functions "Switching", "Dimming", "Venetian blind", "1-byte value transmitter" and 
"scene extension" are configurable.

KNX "Switching" function: 

- 

Available with rocker switch or button operation concept. 

- 

With rocker switch: Command on pressing rocker switch at the top and at the bottom is 
configurable (ON, OFF, TOGGLE; no reaction). 

- 

With button: Command on pressing and releasing the buttons is configurable (ON, OFF, 
TOGGLE, no reaction).

KNX "Dimming" function: 

- 

Available with rocker switches or button operation concept. 

- 

With rocker switch: Command on pressing rocker switch at the top and at the bottom is 
configurable (Brighter ON, Brighter OFF, Darker TOGGLE; no reaction). 

- 

With button: Command on pressing the buttons is configurable (Brighter ON, Darker OFF, 
Brighter/Darker TOGGLE, Brighter TOGGLE, Darker TOGGLE, no reaction). 

- 

Time between switching and dimming can be set. 

- 

Sending a stop telegram at the end of the actuation. 

- 

Telegram repeat if pressed long.

KNX "Venetian blind" function: 

- 

Available with rocker switches or button operation concept. 

- 

With rocker switch: Command on pressing rocker switch is configurable (rocker switch at 
the top: UP / rocker switch at the bottom: DOWN, rocker switch at the top: DOWN / rocker 
switch at the bottom: UP). 

- 

With button: Command on pressing the buttons is configurable (UP, DOWN, no reaction). 

- 

Time between short-time and long-time commands can be set.

KNX function "Value transmitter 1 byte": 

- 

Available with button operation concept. 

- 

Function is configurable (0...255, 0...100%). 

- 

Value on pressing the buttons is configurable.

KNX function "Scene extension": 

- 

Available with button operation concept. 

- 

Function configurable (with or without save function on long button-press). 

- 

Scene number (1...64) on pressing the buttons is configurable.

Page 12 of 34 

Software "10Fx11" 

Scope of functions