o
Before mounting the buttons (10), load the physical address into the device. Loading the
physical address and application software.
Figure 7: Mounting with pushbutton extension module
(13) Supporting frame for mounting with pushbutton extension module
(14) Pushbutton extension module
(15) Slot for pushbutton extension module
(16) Pushbutton extension module connecting cable
5.2 Commissioning
Loading the physical address and application software
Project design and commissioning with ETS3.0d with Patch A or more recent.
The device is connected and ready for operation.
The pushbuttons are not mounted yet.
i
If the device does not receive any application software, or the wrong application software,
then the blue operation LED flashes slowly.
Figure 8: Activating programming mode
6/8
Room controller display module 2-gang
82574805
J0082574805
29.06.2017
