-
Suitable for mixed operation up to the specified output (see section Technical data)
-
Installation in distribution boxes on DIN rail according to EN 60715
i
Lighting systems with an power of more than 1000 W/VA are professional applications.
i
No mixed operation of Tronic and inductive transformers.
i
Operation with HV LED lamps is not possible.
Product characteristics
-
Connection of several power boosters to a single dimmer
-
The total power of the connected loads is divided between the dimmer and power boosters.
-
Power is supplied to the connected loads via a common power cable
-
Operation using upstream dimmer
-
Electronic over-temperature protection
i
Flickering of the connected lamps due to undershoot of the specified minimum load or
through centralised pulses from the power stations. This does not represent any defect in
the device.
i
Brightness differences between the lighting on a dimmer without powerpower booster and
a dimmer with power booster are possible.
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the
corresponding circuit breakers. Cover up live parts in the working environment.
Fitting and connecting the power booster
i
To prevent overheating, maintain a distance of 1 module when operating multiple dimmers
or power units within the same control cabinet.
i
The terminals must be at the top.
o
Snap power booster onto DIN rail.
CAUTION!
Destruction of the devices when connected to the wrong outer conductor.
The dimmer and power boosters will be destroyed.
Connect all devices to the same outer conductor.
2/7
82557263
J:0082557263
27.02.2013
Light Management
Universal amplifier for rail mounting 200-500 W
