48
49
Declaration of Conformity
Uhrenfabrik Junghans GmbH & Co. KG herewith declares that this
product conforms to the principle requirements and other relevant
stipulations of Directive 1999/5/EC.
A corresponding declaration of conformity can be requested from
info@junghans.de.
10
.
General information
External influences can damage the seals, winder and watch glass and
such damage may allow moisture to get in.
We therefore recommend that you have your watch regularly inspected
by your Junghans specialist.
Other servicing tasks should also be done by your Junghans specialist.
Your watch is fitted with a quality wrist strap that has undergone
multiple inspections in our factory. If, however, you decide to change
the strap, please fit a new one of the same quality, preferably an
original Junghans wrist strap.
Watch and wrist strap can be cleaned with a dry or slightly moistened
cloth. Caution: do not use chemical cleaners (e.g. benzine or paint thin-
ners). These may harm the surface.
11. Technical information
Synchronisation time when
there is perfect reception
approx. 3-10 minutes
Time zone adjustment range (UTC)
+12 hours, – 12 hours
Changing from CET to CEST and vice-versa
automatic
Synchronisation with the
time signal transmitter DCF77
2am and 3am (UTC)
Synchronisation with the
time signal transmitters JJY40, JJY60, WWVB
approx. 2am
Operating temperature
0° to + 50° C
Free of charge and FTZ approve. We reserve the right to make technical changes.
12.
Impermeability
Marking
Instructions for use
Washing,
rain,
splashes
Shower
Bath
Swimming
Diving
without
equipment
No mark
No
No
No
No
No
3 ATM
Yes
No
No
No
No
5 ATM
Yes
No
Yes
No
No
10 ATM
Yes
Yes
Yes
Yes
No
Only watches in new condition are to be regarded as ”3 – 10 ATM”.
External influences can, however, affect how watertight they are. Please
have your watch checked on a regular basis.
