Tare entry and net weighing
process
Key
Display (example)
– Press the "up" arrow key until the
flashing digit has the desired
value.
Z
In this example, the arrow key
must be pressed 2 times.
TOTAL
NET
ID CODE
PT
TOTAL
KG/LB
CLR
e1
e2
e3
STP1
STP2
– Press the "Enter" key to confirm
your input.
Z
The net weight is displayed.
The "NET" display indicates
that the tare weight is active.
ID CODE
NET
ID CODE
PT
TOTAL
KG/LB
CLR
e1
e2
e3
STP1
STP2
kg
Remove the load.
Z
The display switches to zero.
NET
ID CODE
PT
TOTAL
KG/LB
CLR
e1
e2
e3
STP1
STP2
kg
Set down the pallet.
Z
The display shows a negative
value.
NET
ID CODE
PT
TOTAL
KG/LB
CLR
e1
e2
e3
STP1
STP2
kg
Z
On a weighing system certified by OIML (Organisation Internationale de Métrologie
Légale), the tare value is deleted automatically when the weight returns to zero. The
tare function must be reactivated for the next weighing operation.
Z
The last manual tare value to be used is stored in the tare memory.
PT
To access the tare memory, press the "PT" key for approx. 3 seconds.
ID CODE
Then press the "Enter" key.
83
11.19 en-GB
Summary of Contents for AMW 22
