153
11
.1
4
E
N
2.1
Working on the electrical system
CAUTION!
Accident risk from Working on the electrical system:
Make sure the electrical system is voltage-free before starting work on it.
X
Remove any rings or metal bracelets etc. before working on electrical components.
X
Only trained personnel may work on the electrical system.
X
Switch off the truck securely (see "Parking the truck securely" on page 103).
X
Before working on the electrical system, all precautionary measures must be taken
to avoid electrical accidents.
X
Remove the starter battery connecting leads to de-energise the truck.
2.2
Consumables and used parts
CAUTION!
Consumables and used parts are an environmental hazard
Used parts and consumables must be disposed of in accordance with the applicable
environmental protection regulations. To change the oil contact the manufacturer's
customer service department, who have been specially trained for this task.
X
Note the safety regulations when handling these materials.
2.3
Wheels
WARNING!
The use of tyres that do not match the manufacturer's specifications can result
in accidents.
The quality of tyres affects the stability and performance of the truck.
Uneven wear affects the truck's stability and increases the stopping distance.
X
When replacing tyres make sure the truck is not skewed.
X
Always replace tyres in pairs, i.e. left and right at the same time.
Z
When replacing rims and tyres fitted at the factory, only use the manufacturer’s
original spare parts. Otherwise the manufacturer’s specifications cannot be
ensured. If you have any queries contact the manufacturer's customer service
department.
Summary of Contents for DFG 660
