0
509
.GB
E 4
3
Starting up the truck
F
Before the truck can be started, operated or a load lifted, the driver must ensure that
there is nobody within the hazardous area.
Checks and operations to be performed before starting daily operation
– Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
– Check the battery attachment and cable connections and grease terminals
if required.
– Check the battery connector for damage, test it and make sure it is secure.
– Check the mains connector and mains cable for damage.
– Check labels for legibility and completion (see chapter B).
– Test warning indicators and safety devices.
– Test hydraulic system.
– Test the efficiency of the brakes (see page 6)
– Check the hydraulic oil level weekly and adjust if necessary.
Switching on the truck
– Make sure the battery is connected (1).
– Insert the key in the key switch (2) and turn it clockwise as far as it will go to
the “I” position.
– Test the warning button (10).
The truck is now operational.
The battery charge / discharge indicator (3) or the CanDis (
o
) shows the available
battery capacity.
– Test the brake function of the tiller (4) (see section 4.2).
2
3
4
1
10
0
509
.GB
E 4
3
Starting up the truck
F
Before the truck can be started, operated or a load lifted, the driver must ensure that
there is nobody within the hazardous area.
Checks and operations to be performed before starting daily operation
– Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
– Check the battery attachment and cable connections and grease terminals
if required.
– Check the battery connector for damage, test it and make sure it is secure.
– Check the mains connector and mains cable for damage.
– Check labels for legibility and completion (see chapter B).
– Test warning indicators and safety devices.
– Test hydraulic system.
– Test the efficiency of the brakes (see page 6)
– Check the hydraulic oil level weekly and adjust if necessary.
Switching on the truck
– Make sure the battery is connected (1).
– Insert the key in the key switch (2) and turn it clockwise as far as it will go to
the “I” position.
– Test the warning button (10).
The truck is now operational.
The battery charge / discharge indicator (3) or the CanDis (
o
) shows the available
battery capacity.
– Test the brake function of the tiller (4) (see section 4.2).
2
3
4
1
10
Summary of Contents for EJC M10
