0
509
.GB
F 2
Electrical System:
Only suitably trained personnel may operate on the truck's
electrical system. Before working on the electrical system, take all precautionary
measures to avoid electric shocks. Battery-operated trucks must also be de-
energised by disconnecting the battery.
Welding:
To avoid damaging electric or electronic components, remove these from
the truck before performing welding operations.
Settings:
When repairing or replacing hydraulic, electric or electronic components or
assemblies, always note the truck-specific settings.
Tyres:
The quality of tyres affects the stability and performance of the truck.
When replacing factory fitted tyres only used original manufacturer’s spare parts, as
otherwise the truck will not comply with the data plate specifications.
When changing wheels and tyres, ensure that the truck does not slew (e.g. when
replacing wheels always left and right simultaneously).
Lift chains:
Lift chains wear rapidly if not lubricated. The intervals stated in
the service checklist apply to normal duty use. More demanding conditions
(dust, temperature) require more regular lubrication. The prescribed chain spray
must be used in accordance with the instructions. Applying grease externally will not
provide sufficient lubrication.
Hydraulic hoses:
The hoses must be replaced every six years. When replacing
hydraulic components, also replace the hoses in the hydraulic system.
0
509
.GB
F 2
Electrical System:
Only suitably trained personnel may operate on the truck's
electrical system. Before working on the electrical system, take all precautionary
measures to avoid electric shocks. Battery-operated trucks must also be de-
energised by disconnecting the battery.
Welding:
To avoid damaging electric or electronic components, remove these from
the truck before performing welding operations.
Settings:
When repairing or replacing hydraulic, electric or electronic components or
assemblies, always note the truck-specific settings.
Tyres:
The quality of tyres affects the stability and performance of the truck.
When replacing factory fitted tyres only used original manufacturer’s spare parts, as
otherwise the truck will not comply with the data plate specifications.
When changing wheels and tyres, ensure that the truck does not slew (e.g. when
replacing wheels always left and right simultaneously).
Lift chains:
Lift chains wear rapidly if not lubricated. The intervals stated in
the service checklist apply to normal duty use. More demanding conditions
(dust, temperature) require more regular lubrication. The prescribed chain spray
must be used in accordance with the instructions. Applying grease externally will not
provide sufficient lubrication.
Hydraulic hoses:
The hoses must be replaced every six years. When replacing
hydraulic components, also replace the hoses in the hydraulic system.
Summary of Contents for EJC M10
