D 7
0606
.GB
6
Removing and installing the battery
F
The truck must stand horizontally. To prevent short circuits, batteries with open poles
or connectors must be covered with a rubber mat. Lay down the battery plug and ca-
ble in such a manner that they do not snag on the truck when the battery is pulled out.
Z
When transporting the battery with crane equipment, pay attention that the load ca-
pacity is sufficient (see battery weight on the battery identification plate on the battery
trough). The crane equipment must pull vertically. The hooks of the crane equipment
must never fall onto the battery cells.
– Expose the battery (see Section 4).
– Remove the battery plug (3).
– Connect the crane equipment to the eyelets (7).
– Pull the battery upwards and out of the battery trough.
M
Installation occurs in the reverse sequence; pay attention that the battery is installed
in the correct position and is connected properly.
– After reinstallation, check all the cable and plug connections for visible damage.
F
Close the battery hood slowly and carefully.
Keep your fingers away from the area between the battery hood and the chassis.
1
2
3
4
5
6
7
8
9
0
Set
3
8
D 7
0606
.GB
6
Removing and installing the battery
F
The truck must stand horizontally. To prevent short circuits, batteries with open poles
or connectors must be covered with a rubber mat. Lay down the battery plug and ca-
ble in such a manner that they do not snag on the truck when the battery is pulled out.
Z
When transporting the battery with crane equipment, pay attention that the load ca-
pacity is sufficient (see battery weight on the battery identification plate on the battery
trough). The crane equipment must pull vertically. The hooks of the crane equipment
must never fall onto the battery cells.
– Expose the battery (see Section 4).
– Remove the battery plug (3).
– Connect the crane equipment to the eyelets (7).
– Pull the battery upwards and out of the battery trough.
M
Installation occurs in the reverse sequence; pay attention that the battery is installed
in the correct position and is connected properly.
– After reinstallation, check all the cable and plug connections for visible damage.
F
Close the battery hood slowly and carefully.
Keep your fingers away from the area between the battery hood and the chassis.
1
2
3
4
5
6
7
8
9
0
Set
3
8
Summary of Contents for EJE 116
