0903
.GB
E 4
3
Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and operations to be performed before starting daily work
– Check the entire truck (in particular the wheels and the load lifting device) for
obvious damages.
– Visually check the battery and cable connections.
Adjusting the driver seat
A
To achieve optimum seat cushioning
the driver seat must be adjusted to the
driver’s weight.
Set the driver weight with the seat
unoccupied.
– Swing out the weight setting lever
(20) to the front and set the driver
weight (visible in the window)
– Return the weight setting lever to the
original position
– Sit on the driver seat.
– Pull driver seat locking lever (17)
upward and set driver seat to the desired seating position by sliding it forward or
backward.
– Let the locking lever engage again
– Turn the handwheel (18) to the right or left to adapt the backrest cushion to your
needs
– Pull the lever (19) to adjust the backrest. Position the backrest as desired and
release the lever
– Lift driver’s seat and let engage when the desired height is reached.
A
The driver’s seat returns to its bottom position when being lifted beyond its top
position (stop).
f
The driver seat locking must be securely latched in the adjusted position. The driver
seat position must not be changed while travelling.
A
Driver seat adjustment has been described for the standard version. Heed the
instructions provided by the manufacturer if other seat versions are to be adjusted.
Make sure all controls can be easily reached.
20
17 18 2119
0903
.GB
E 4
3
Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and operations to be performed before starting daily work
– Check the entire truck (in particular the wheels and the load lifting device) for
obvious damages.
– Visually check the battery and cable connections.
Adjusting the driver seat
A
To achieve optimum seat cushioning
the driver seat must be adjusted to the
driver’s weight.
Set the driver weight with the seat
unoccupied.
– Swing out the weight setting lever
(20) to the front and set the driver
weight (visible in the window)
– Return the weight setting lever to the
original position
– Sit on the driver seat.
– Pull driver seat locking lever (17)
upward and set driver seat to the desired seating position by sliding it forward or
backward.
– Let the locking lever engage again
– Turn the handwheel (18) to the right or left to adapt the backrest cushion to your
needs
– Pull the lever (19) to adjust the backrest. Position the backrest as desired and
release the lever
– Lift driver’s seat and let engage when the desired height is reached.
A
The driver’s seat returns to its bottom position when being lifted beyond its top
position (stop).
f
The driver seat locking must be securely latched in the adjusted position. The driver
seat position must not be changed while travelling.
A
Driver seat adjustment has been described for the standard version. Heed the
instructions provided by the manufacturer if other seat versions are to be adjusted.
Make sure all controls can be easily reached.
20
17 18 2119
Summary of Contents for EKE 30-2 ac
