E 9
060
0.GB
4.4
EMB wheel arm adjustment
Adjust the right- and left-hand wheel arms one after the other.
f
Make sure that both wheel arms are pulled out evenly.
A
The wheel arms can be adjusted in steps of 25 mm.
- Protect the truck from rolling away and use a lifting jack at the jack-up point (13) to
lift one side of the truck.
- Completely unscrew the SW14 hexagon socket head cap screw (15) and remove
it along with the washer (16).
- Adjust the wheel arm (14) to the desired width. The thread must align with the bore.
- Screw in the screw with the washer (15, 16) and tighten it using a torque wrench
(torque = 195 Nm).
- Lower the lifting jack and remove the objects that protect the truck from rolling
away.
- Adjust the other wheel arm in the same manner.
4.5
Parking the truck and rendering it safe
f
Always render the truck safe when parking it.
Do not park the truck on slopes.
The load lifting device must always be completely lowered.
- Lower the load lifting device.
- Switch the key switch (10) to the vertical position and remove the key.
16
15
13
13
14
E 9
060
0.GB
4.4
EMB wheel arm adjustment
Adjust the right- and left-hand wheel arms one after the other.
f
Make sure that both wheel arms are pulled out evenly.
A
The wheel arms can be adjusted in steps of 25 mm.
- Protect the truck from rolling away and use a lifting jack at the jack-up point (13) to
lift one side of the truck.
- Completely unscrew the SW14 hexagon socket head cap screw (15) and remove
it along with the washer (16).
- Adjust the wheel arm (14) to the desired width. The thread must align with the bore.
- Screw in the screw with the washer (15, 16) and tighten it using a torque wrench
(torque = 195 Nm).
- Lower the lifting jack and remove the objects that protect the truck from rolling
away.
- Adjust the other wheel arm in the same manner.
4.5
Parking the truck and rendering it safe
f
Always render the truck safe when parking it.
Do not park the truck on slopes.
The load lifting device must always be completely lowered.
- Lower the load lifting device.
- Switch the key switch (10) to the vertical position and remove the key.
16
15
13
13
14
Summary of Contents for EMC 110/B 10
