F 3
0708
.GB
3
Maintenance checklist
A
To ensure the safety and service life of the truck, the items listed in the maintenance
checklist must be carried out every 1000 service hours, or at least annually.
m
a) If there are leakages, tighten the screwed connection
on the hydraulic unit with a maximum torque of 35 Nm.
A
W1 service intervals are to be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.
Chassis /
superstructure:
Check all load bearing elements for damage
Check all bolted connections
Drive unit:
Check the transmission for noises and leakage
Wheels:
Check for wear and damage
Check the wheel bearings and ensure secure fastening of
wheels
Check that the wheel bolts are firmly seated; tighten if
necessary
Steering / brake
system:
Check the steering bearing play
Performance and adjustment check
Check the braking function of the gas pressure spring;
check the gas pressure spring for leakage and damage
Lifting device:
Check for correct functioning, adjustment and wear
Check the fork tines and fork carrier for wear and damage
Hydraulic system:
Performance check
Check all connections for leakage and damage
a)
Check hydraulic cylinders for leakage, damage and secure
attachment
Check the oil level
Check the pressure limiting valves for correct functioning
Electrical system:
Performance check
Check all cables for secure connection and damage
Check the fuses for correct amperage
Check the warning systems and safety circuits for correct
functioning
Electric motors:
Check motor for secure attachment
Batteries:
Check the terminals for secure attachment and apply
grease
Check battery connections for tight fit
Check the battery cables for damage; renew if necessary
F 3
0708
.GB
3
Maintenance checklist
A
To ensure the safety and service life of the truck, the items listed in the maintenance
checklist must be carried out every 1000 service hours, or at least annually.
m
a) If there are leakages, tighten the screwed connection
on the hydraulic unit with a maximum torque of 35 Nm.
A
W1 service intervals are to be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.
Chassis /
superstructure:
Check all load bearing elements for damage
Check all bolted connections
Drive unit:
Check the transmission for noises and leakage
Wheels:
Check for wear and damage
Check the wheel bearings and ensure secure fastening of
wheels
Check that the wheel bolts are firmly seated; tighten if
necessary
Steering / brake
system:
Check the steering bearing play
Performance and adjustment check
Check the braking function of the gas pressure spring;
check the gas pressure spring for leakage and damage
Lifting device:
Check for correct functioning, adjustment and wear
Check the fork tines and fork carrier for wear and damage
Hydraulic system:
Performance check
Check all connections for leakage and damage
a)
Check hydraulic cylinders for leakage, damage and secure
attachment
Check the oil level
Check the pressure limiting valves for correct functioning
Electrical system:
Performance check
Check all cables for secure connection and damage
Check the fuses for correct amperage
Check the warning systems and safety circuits for correct
functioning
Electric motors:
Check motor for secure attachment
Batteries:
Check the terminals for secure attachment and apply
grease
Check battery connections for tight fit
Check the battery cables for damage; renew if necessary
Summary of Contents for EMC 110/B 10
