![background image](http://html1.mh-extra.com/html/jungheinrich/esc-316/esc-316_operating-instructions-manual_2032036106.webp)
105
11
.1
4
E
N
2.1
Working on the electrical system
WARNING!
Electrical current can cause accidents
Make sure the electrical system is voltage-free before starting work on it. The
capacitors in the controller must be completely discharged. The capacitors are
completely discharged after approximately 10 minutes. Before starting maintenance
on the electrical system:
X
Only suitably trained electricians may operate on the truck's electrical system.
X
Before working on the electrical system, take all precautionary measures to avoid
electric shocks.
X
Park the truck securely (see "Parking the truck securely" on page 53).
X
Remove the battery, see "Exposing the battery" on page 36.
X
Remove any rings, metal wristbands etc.
2.2
Consumables and used parts
CAUTION!
Consumables and used parts are an environmental hazard
Used parts and consumables must be disposed of in accordance with the applicable
environmental protection regulations. To change the oil contact the manufacturer's
customer service department, who have been specially trained for this task.
X
Note the safety regulations when handling these materials.
2.3
Wheels
WARNING!
The use of wheels that do not comply with the manufacturer's specifications
can result in accidents
The quality of wheels affects the stability and driving characteristics of the truck.
Uneven wear affects the truck's stability and increases the stopping distance.
X
After replacing wheels, make sure the truck is not skewed.
X
Always replace wheels in pairs, i.e. the left- and right-hand wheels at the same
time.
Z
When replacing wheels fitted at the factory, only use the manufacturer’s original
spare parts. Otherwise the manufacturer's specification will not be adhered to.
Summary of Contents for ESC 316
