B 9
501
1
838
6 GB
3.4
EN standards
Continuous sound level:
ETX ac 125/150:
73 dB(A)
According to prEN 12053
The continuous sound pressure level is a value that has been averaged according to
the guidelines of the standards and takes the sound pressure level during travelling,
lifting, and idling into consideration. The sound pressure level is measured at the ear
of the driver.
Vibration:
ETX ac 125/150
a
w,zS
= 0.44 m/s
2
According to prEN 13059
The swinging acceleration acting on the body in its operating position is, according to
standard regulations, the linear integrated, weighted acceleration in the vertical
plane. It is determined by driving over bumps at a constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms compliance with the
limit values for electromagnetic emission and
interference immunity as well as testing of static
electricity discharge according to
prEN 12895 (1999) and the references to other
standards contained therein.
A
Modifications of electric and electronic components and their arrangement are only
allowed with the permission in writing of the manufacturer.
3.5
Conditions of use
Ambient temperature:
- in operation
0° C to + 40° C
24-hour ambient temperature average:
max. 25° C
max. humidity in interior rooms 70%, no
condensation
A
For permanent use below 0
°
C it is recommended to fill the hydraulic system with low-
viscosity oil according to manufacturer information.
When the truck is operated in cold stores or in extreme fluctuations of temperature or
humidity, special equipment and a special approval are required for industrial trucks.
B 9
501
1
838
6 GB
3.4
EN standards
Continuous sound level:
ETX ac 125/150:
73 dB(A)
According to prEN 12053
The continuous sound pressure level is a value that has been averaged according to
the guidelines of the standards and takes the sound pressure level during travelling,
lifting, and idling into consideration. The sound pressure level is measured at the ear
of the driver.
Vibration:
ETX ac 125/150
a
w,zS
= 0.44 m/s
2
According to prEN 13059
The swinging acceleration acting on the body in its operating position is, according to
standard regulations, the linear integrated, weighted acceleration in the vertical
plane. It is determined by driving over bumps at a constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms compliance with the
limit values for electromagnetic emission and
interference immunity as well as testing of static
electricity discharge according to
prEN 12895 (1999) and the references to other
standards contained therein.
A
Modifications of electric and electronic components and their arrangement are only
allowed with the permission in writing of the manufacturer.
3.5
Conditions of use
Ambient temperature:
- in operation
0° C to + 40° C
24-hour ambient temperature average:
max. 25° C
max. humidity in interior rooms 70%, no
condensation
A
For permanent use below 0
°
C it is recommended to fill the hydraulic system with low-
viscosity oil according to manufacturer information.
When the truck is operated in cold stores or in extreme fluctuations of temperature or
humidity, special equipment and a special approval are required for industrial trucks.
Summary of Contents for ETX ac 125
