D 3
501
1
838
6 GB
4
Removing and installing the battery
f
Only batteries with isolated cells and insulated terminal connections are allowed.
f
When changing batteries with the aid of a crane, ensure that the crane is of adequate
capacity (the battery weight is indicated on the battery identification plate at the
battery trough). The lifting gear must pull in a vertical direction to prevent damage to
the battery trough. The hooks must be fastened in such a way that they cannot fall
onto the battery cells when the crane hoisting gear is slackened.
f
When replacing the battery, make sure only to use the same type as replacement.
Additional weights must not be removed and their position not changed.
– Turn key switch to “O” (zero) and push the EMERGENCY OFF.
– Fully open the battery cover.
f
Connecting and disconnecting the battery plug and socket is only permitted with the
truck and charger switched off.
– Unplug battery connector.
– Lift out the frame side walls.
4.1
Removal and replacement with battery trolley
f
The truck must be parked on a horizontal surface, so that the battery cannot roll out
by itself when the battery securing device is removed.
– Loosen the battery safety device.
– Pull out the battery to the side onto the battery trolley provided.
Replacing the battery is done in reverse order.
f
After replacing the battery, check all cable and plugged connections for visible
damages and before recommissioning check that:
– the battery safety devices are in place,
– the battery cover is fully closed.
D 3
501
1
838
6 GB
4
Removing and installing the battery
f
Only batteries with isolated cells and insulated terminal connections are allowed.
f
When changing batteries with the aid of a crane, ensure that the crane is of adequate
capacity (the battery weight is indicated on the battery identification plate at the
battery trough). The lifting gear must pull in a vertical direction to prevent damage to
the battery trough. The hooks must be fastened in such a way that they cannot fall
onto the battery cells when the crane hoisting gear is slackened.
f
When replacing the battery, make sure only to use the same type as replacement.
Additional weights must not be removed and their position not changed.
– Turn key switch to “O” (zero) and push the EMERGENCY OFF.
– Fully open the battery cover.
f
Connecting and disconnecting the battery plug and socket is only permitted with the
truck and charger switched off.
– Unplug battery connector.
– Lift out the frame side walls.
4.1
Removal and replacement with battery trolley
f
The truck must be parked on a horizontal surface, so that the battery cannot roll out
by itself when the battery securing device is removed.
– Loosen the battery safety device.
– Pull out the battery to the side onto the battery trolley provided.
Replacing the battery is done in reverse order.
f
After replacing the battery, check all cable and plugged connections for visible
damages and before recommissioning check that:
– the battery safety devices are in place,
– the battery cover is fully closed.
Summary of Contents for ETX ac 125
