Juniper Advanced Threat Prevention Appliance
6
Copyright© 2018, Juniper Networks, Inc.
Hardware, Software and Virtual Appliance Access via SSH
To access the Juniper ATP Appliance CLI over the management network:
1.
Start a terminal window session and use the
ssh
command to access the appliance.
For example, if the IP address of the appliance is 10.1.1.2, enter the following command:
xxx
xssh admin@10.1.1.2
2.
When prompted, enter your password. By default, the admin user name is
admin
and the password is
1JATP234.
3.
To launch the configuration wizard, enter the command
wizard
.
# wizard
Configuration Wizard Command Prompt Progressions
for steps.
CLI Help and Keyboard Shortcuts
To display Juniper ATP Appliance CLI help, type the command
help
to display CLI keys and auto-completion
usage.
For context-sensitive help, alternatively, enter a “?” to display either a list of possible command completions with
summaries, or the full syntax of the current command. A subsequent repeat of this key, when a command has
been resolved, will display a detailed reference, as described below.
•
Enter “?” at the prompt to display a list of the available commands in the current mode.
•
Enter “?” after you type a command to display its available options and parameters.
•
Enter “?” after a partially typed keyword to display command matches for auto-completions
You can enter commands in abbreviated form if you enter enough characters to uniquely identify each keyword.
For example, the show interface command can be abbreviated as:
sh in
Enter the following server
attributes:
Is this a Central Manager device:
Device Name: (must be unique)
Device Description
Device Key PassPhrase
NOTE: Remember this
passphrase and use it for all
distributed devices!
Enter Yes; the system
will auto-set IP
127.0.0.1 as the All-in-
One IP address.
Enter the Juniper ATP
Appliance Collector
Host Name; this
identifies the Collector
in the Web UI.
Enter a device
Description
Enter a user-defined
PassPhrase to be used
to authenticate the
Core to the Central
Manager.
Enter Yes; the system
will auto-set IP
127.0.0.1 as the All-in-
One IP address.
Enter a Juniper ATP
Appliance Mac Mini or
Core/CM Host Name;
this identifies the Mac
OS X or Core Engine in
the Web UI.
Enter a device
Description
Enter the same
PassPhrase used to
authenticate the Core
or Mac Mini to the
Central Manager.
Enter No; the system
will request that you
enter the CM IP
address now.
Enter the Juniper ATP
Appliance Collector
Host Name; this
identifies the Collector
in the Web UI.
Enter a device
Description
Enter the same
PassPhrase used to
authenticate the
Collector to the Central
Manager.
Configuration Wizard
Prompts
Customer Response
from All-in-One
Customer Response
from Core or Mac Mini
Customer Response
from Collector
Summary of Contents for Advanced Threat Prevention Appliance
Page 70: ...Juniper Advanced Threat Prevention Appliance 62 Copyright 2018 Juniper Networks Inc ...
Page 94: ...Juniper Advanced Threat Prevention Appliance 86 Copyright 2018 Juniper Networks Inc ...
Page 118: ...Juniper Advanced Threat Prevention Appliance 110 Copyright 2018 Juniper Networks Inc ...
