manualshive.com logo in svg

Juniper BGP, Configuration Manual

The Juniper BGP Configuration Manual, available for free download at 88.208.23.73:8080, provides comprehensive instructions and guidance on configuring the Juniper BGP product. This manual equips users with the knowledge and tools needed to optimize network performance and ensure seamless connectivity using Juniper BGP technology.

Share
Download
background image

When a peer determines that communication has been lost, it can reinitiate the
sending of hello messages. In this case, the peer generates a new source instance
different than the one it previously used for communication with its peer.

RSVP-TE Graceful Restart

RSVP-TE graceful restart enables routers to maintain MPLS forwarding state when a
link or node failure occurs. In a link failure, control communication is lost between
two nodes, but the nodes do not lose their control or forwarding state.

A node failure occurs when the LSR has a failure in the RSVP-TE control plane, but
not in the data plane. The LSR maintains its data forwarding state. Traffic can continue
to be forwarded while RSVP-TE restarts and recovers. The graceful restart feature
supports the restoration and resynchronization of RSVP-TE states and MPLS
forwarding state between the restarting router and its RSVP-TE peers during the
graceful restart recovery period.

The RSVP-TE graceful restart feature enables an LSR to gracefully restart, to act as a
graceful restart helper node for a neighboring router that is restarting, or both.

Announcement of the Graceful Restart Capability

LSRs use the RSVP-TE hello mechanism to announce their graceful restart capabilities
to their peer RSVP-TE routers. Both restarting LSRs and helper LSRs include the
restart_cap object in hello requests and hello acks. The restart_cap object specifies
both the graceful restart time and the graceful restart recovery time:

■

restart time—The sum of how long it takes the sender to restart RSVP-TE after
a control plane failure plus how long it takes to reestablish hello communication
with the neighboring RSVP-TE routers.

■

recovery time—The period within which you want neighboring routers to
resynchronize with the sending router’s RSVP-TE state and MPLS forwarding
state after the peers have re-established hello communication. The restarting
LSR advertises the configured or default recovery time only while the graceful
restart is in progress. When the LSR is not currently restarting or when it is
incapable of preserving its MPLS forwarding state during the restart, the LSR
advertises a recovery time of zero.

Both the restarting router and neighboring GR helper routers save the restart and
recovery times that they receive from their peers.

Restarting Behavior

When the control plane fails, the LSR stops sending hello messages to its RSVP-TE
neighbors. However, as a restarting router the LSR can continue to forward MPLS
traffic because it preserves its MPLS forwarding state during the restart. When
RSVP-TE comes back up, the restarted router sends the first hello message to its
neighbors with a new source instance value to indicate that it had a control plane
failure. The destination instance value in the hello message is set to zero. The recovery
time included in this hello message is set to zero only if the router was unable to
preserve the MPLS forwarding state or to support control state recovery.

254

■

RSVP-TE Graceful Restart

JUNOSe 11.1.x BGP and MPLS Configuration Guide

Summary of Contents for BGP













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BGP

Canon PowerShot SD10 Digital ELPH Software Starter Manual preview
PowerShot SD10 Digital ELPH
Brand: Canon Pages: 124
Panasonic Avccam AG-AF100A Series Manual preview
Avccam AG-AF100A Series
Brand: Panasonic Pages: 19
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION 10-2007 Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION 10-2007
Brand: Novell Pages: 30
Fortinet FortiClient Datasheet preview
FortiClient
Brand: Fortinet Pages: 4
CDML Advanced Calculator 2.2 User Manual preview
Advanced Calculator 2.2
Brand: CDML Pages: 48
GE Secure Perfect 6.1.1 User Manual preview
Secure Perfect 6.1.1
Brand: GE Pages: 269
DeLorme Earthmate GPS BT-20 Quick Start Manual preview
Earthmate GPS BT-20
Brand: DeLorme Pages: 9
Black Box FX160A User Manual preview
FX160A
Brand: Black Box Pages: 65
Silicon Image SataRaid User Manual preview
SataRaid
Brand: Silicon Image Pages: 36
F-SECURE POLICY MANAGER 9.0 Administrator'S Manual preview
POLICY MANAGER 9.0
Brand: F-SECURE Pages: 102
F-SECURE MOBILE SECURITY 3.1 FOR S60 User Manual preview
MOBILE SECURITY 3.1 FOR S60
Brand: F-SECURE Pages: 31
FieldServer FS-8700-70 Driver Manual preview
FS-8700-70
Brand: FieldServer Pages: 14
Mackie FINAL MIX VST - FOR TRACKTION Manual preview
FINAL MIX VST - FOR TRACKTION
Brand: Mackie Pages: 26
MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION... Manual preview
COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION...
Brand: MACROMEDIA Pages: 168
National Instruments Image Acquisition Software User Manual preview
Image Acquisition Software
Brand: National Instruments Pages: 68
FARONICS DEEP FREEZE ENTERPRISE 6 Manual preview
DEEP FREEZE ENTERPRISE 6
Brand: FARONICS Pages: 64
Tadiran Telecom Coral SeaBeam Installation And Configuration Reference Manual preview
Coral SeaBeam
Brand: Tadiran Telecom Pages: 68
Lenovo ThinkPad R51 Supplementary Manual preview
ThinkPad R51
Brand: Lenovo Pages: 104

Brands by name

Popular brands

Load more brands