BXOS 4.1 R2 Software Release Notes
22
Changes in the CLI Commands
Table 2 on page 22 lists the new commands included in the 3.0 R2 release.
Table 2: The CLI Commands Added in the 3.0 R2 Release
Commands
PR Number
The ATM OAM CLI commands for
configuring an IMA group on an ATM
interface:
set ais-rdi alarmdowncount cell
set ais-rdi alarmcleartimeout seconds
set cc (source | sink | both)
set e2e-endpoint enable
set oam-liveness {
up-count cells
down-count cells
}
set oam-period (seconds | disable)
set seg-endpoint enable
310534
The command to assign the default
overload time period to the gateway:
delete overload timeout
312904
