List of Technical Publications
23
BXOS 4.1 R2 Software Release Notes
List of Technical Publications
Table 3 on page 23 lists the software and hardware guides for the gateway and
describes the content of each document.
Table 3: BX7000 Multi-Access Gateway Supported Documentation
Copyright © 2010, Juniper Networks, Inc. All rights reserved.
Juniper Networks, the Juniper Networks logo, JUNOS, NetScreen, ScreenOS, and Steel-Belted Radius are registered
trademarks of Juniper Networks, Inc. in the United States and other countries. JUNOSe is a trademark of Juniper
Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property
of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following
patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440,
6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918,
6,567,902, 6,578,186, and 6,590,785.
Book
Description
BX 7000 Multi-Access Gateway Hardware
Guide
Provides a detailed hardware description of the gateway. This guide:
Explains how to unpack, install, mount, access, and maintain the gateway.
Explains the various hardware components such as power supply, chassis, and
ports.
Provides troubleshooting of the hardware-related issues.
BXOS Configuration Guide
Provides a detailed software description of the BXOS software. This guide:
Explains the configuration statements used to configure various properties of the
gateway.
Describes how to configure the basic system properties, protocols, interfaces,
pseudowires, and tunnels.
Explains statement hierarchies and parameters used in configuration.
BXOS CLI Users Guide and Command
Reference
Provides a detailed description of all the configuration mode and operational mode
commands. This guide:
Explains how to start the CLI and the components of the CLI.
Contains information about the commands used to set the gateway properties
(set commands) and the commands used to view the outputs (show
commands).
BX 7000 Multi-Access Gateway Getting
Started Guide
Provides an overview on installing the gateway. This guide:
Explains how to quickly set up the gateway.
Contains the basic steps to install the gateway and establish the basic gateway
connectivity.
