INIT: Entering runlevel: 3
Entering non-interactive startup
...
During initial power-on, the components of the platform run boot code, go through
a series of self-diagnostic tests, and synchronize with each other.
When the tests are completed, use the LEDs on each module to determine the status
of the device. Observe the module LEDs on the front or rear components.
Safety Warnings
For your safety, before installing the device, review all safety warnings in this section.
WARNING:
The recommended maximum ambient temperature is 40° C (104° F).
For safe operation take into consideration the internal temperature within the rack.
WARNING:
Install equipment in the rack from the bottom upward. Doing this helps
maintain the stability of the rack and reduces the chance of the rack tipping over.
WARNING:
Do not insert any metal object, such as a screwdriver, into an open slot
or the backplane. Doing so can cause electric shock and serious burns.
WARNING:
Connect the device or rack to ground (earth), and ensure that a reliable
grounding path is maintained in the rack.
WARNING:
Do not work on the device or connect or disconnect cables during lightning
activity.
WARNING:
Be sure that circuit breakers for the power source are in the OFF position
before attaching power cables.
WARNING:
Before servicing the device, turn off the power.
WARNING:
Remove jewelry (including rings, necklaces, and watches) before working
on equipment that is connected to power lines. Metal objects heat up when connected
to power and ground and can cause serious burns or become welded to the terminals.
Safety Warnings
■
15
Safety Warnings
