•
Two EX4200-48P switches
The switches are connected as a four-member Virtual Chassis configuration and are
identified as switch-A, switch-B, switch-C, and switch-D. The master is switch-A.
Configuration
Assign the Virtual Chassis ID in a Virtual Chassis configuration:
CLI Quick
Configuration
To assign a Virtual Chassis ID so that, when two Virtual Chassis configurations merge,
the ID that you assigned takes precedence over the automatically assigned Virtual Chassis
IDs and becomes the ID of the newly merged Virtual Chassis configuration, copy the
following command and paste it into the terminal window:
[edit]
set virtual-chassis id 9622.6ac8.5345
Step-by-Step
Procedure
To assign the Virtual Chassis ID in a Virtual Chassis configuration:
1.
Assign the Virtual Chassis ID:
[edit]
user@switch-A#
set virtual-chassis
id
9622.6ac8.5345
NOTE:
We recommend that you use the commit synchronize command
to save any configuration changes that you make to a multimember
Virtual Chassis configuration.
Verification
To verify that the Virtual Chassis ID has been assigned as you intended, perform these
tasks:
•
Verifying That the Virtual Chassis ID Is Assigned on page 998
Verifying That the Virtual Chassis ID Is Assigned
Purpose
Verify that the Virtual Chassis ID has been assigned in a Virtual Chassis configuration.
Action
Issue the
show configuration virtual-chassis id
command.
1.
2.
Check to see that the Virtual Chassis ID number is listed.
user@switch-A> show configuration virtual-chassis id
id 9622.6ac8.5345;
Meaning
The Virtual Chassis ID has been assigned as 9622.6ac8.5345.
Related
Documentation
Assigning the Virtual Chassis ID to Determine Precedence During a Virtual Chassis
Merge (CLI Procedure) on page 1031
•
Copyright © 2010, Juniper Networks, Inc.
998
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
