NOTE:
The setting for the new member switch's uplink VCP remains intact
and is not affected by the change of member ID.
5.
If you have additional members in the second wiring closet, set a redundant VCP
uplink on another member switch by issuing the
request virtual-chassis vc-port
command.
Related
Documentation
Configuring a Virtual Chassis (CLI Procedure) on page 1011
•
•
Configuring a Virtual Chassis (J-Web Procedure) on page 1015
•
Example: Configuring a Virtual Chassis Interconnected Across Multiple Wiring Closets
on page 963
•
Example: Configuring a Virtual Chassis Using a Preprovisioned Configuration File on
page 982
•
Monitoring Virtual Chassis Configuration Status and Statistics on page 1041
Setting an Uplink Module Port or an EX4200-24F Network Port as a Virtual Chassis
Port Using the LCD Panel
You can interconnect EX4200 switches that are beyond the reach of the Virtual Chassis
cables as members of a Virtual Chassis configuration by installing the optional SFP uplink
module, SFP+ uplink module, or XFP uplink module and connecting the uplink module
ports. You can also use the network ports on EX4200-24F switches to interconnect
Virtual Chassis member switches. To use the uplink module ports or the EX4200-24F
network ports for interconnecting member switches, you must explicitly set the ports as
VCPs.
This topic describes how to set the uplink module ports and the EX4200-24F network
ports as VCPs using the LCD panel on the front of EX4200 switches.
In this procedure, we show how to configure uplink module port
ge-0/1/2
as a VCP.
To set an uplink module port as a VCP using the LCD panel:
1.
Press
Menu
until you see
MAINTENANCE MENU
.
2.
Press
Menu
until you see
REQUEST VC PORT
.
3.
Press
Enter
. You will see
SET VC PORT?
.
4.
Press
Enter
. You will see
SET FPC 0?
.
5.
Press
Enter
. You will see
SET PIC 0?
.
6.
Press
Menu
until you see
SET PIC 1?
.
7.
Press
Enter
. You will see
SET PORT 0?
.
8.
Press
Menu
until you see
SET PORT 2?
.
Copyright © 2010, Juniper Networks, Inc.
1026
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
