request virtual-chassis vc-port
Syntax
request virtual-chassis vc-port set | delete pic-slot pic-slot port port-number
<member member-id>
Release Information
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description
Enable or disable an uplink module port (on an SFP, SFP+, or XFP uplink module) or an
SFP network port on an EX4200-24F switch as a Virtual Chassis port (VCP).
Options
pic-slot
pic-slot
—Number of the PIC slot for the uplink module port or SFP network port
on an EX4200-24F switch. Specify
1
to represent the uplink module PIC on the EX
Series switch. Specify
0
to represent the SFP network port on an EX4200-24F switch.
port
port-number
—Number of the uplink module port (
0
or
1
) or SFP network port on an
EX4200-24F switch (
0
to
23
) that is to be enabled or disabled as a VCP.
member
member-id
—(Optional) Enable or disable the specified VCP on the specified
member of the Virtual Chassis configuration.
Additional Information
If you omit
member member-id
, this command defaults to enabling or disabling the uplink
VCP or SFP network port configured as a VCP on the switch where the command is
issued.
Required Privilege
Level
system-control
Related
Documentation
request virtual-chassis vc-port on page 1073 (dedicated port)
•
•
show virtual-chassis vc-port on page 1083
•
show virtual-chassis vc-port statistics on page 1086
•
clear virtual-chassis vc-port statistics on page 1068
•
Understanding Virtual Chassis Components on page 924
List of Sample Output
request virtual-chassis vc-port set pic-slot 1 port 0 on page 1072
request virtual-chassis vc-port set pic-slot 1 port 1 member 3 on page 1072
request virtual-chassis vc-port delete pic-slot 1 port 1 member 3 on page 1072
request virtual-chassis
vc-port set pic-slot 1
port 0
user@host>
request virtual-chassis vc-port set pic-slot 1 port 0
To check the results of this command, use the show virtual-chassis vc-port command.
request virtual-chassis
vc-port set pic-slot 1
port 0
request virtual-chassis
vc-port set pic-slot 1
port 1 member 3
user@host>
request virtual-chassis vc-port set pic-slot 1 port 1 member 3
To check the results of this command, use the show virtual-chassis vc-port command.
request virtual-chassis
vc-port delete pic-slot
1 port 1 member 3
user@host>
request virtual-chassis vc-port delete pic-slot 1 port 1 member 3
To check the results of this command, use the show virtual-chassis vc-port command.
Copyright © 2010, Juniper Networks, Inc.
1072
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
